Sikadur ® - 52 T
Sikadur ® - 52 T is a two-component, without solvent, the high strength of low viscosity epoxy resin, specially used for perfusion and fill holes and cracks in concrete.
- The crack pouring material strength
- Low viscosity
- Can be used for the surface dry and humid environment
- High mechanical strength and adhesion strength
- The material hard but not brittle
- Hardening without shrinkage
Using range
Filling and sealing pores and cracks in concrete structures, such as column, beam, foundation, wall structure.Feature/advantages
- The crack pouring material strength
- Low viscosity
- Can be used for the surface dry and humid environment
- High mechanical strength and adhesion strength
- The material hard but not brittle
- Hardening without shrinkage
packaging
A agent |
20 kg |
B agent |
10 kg |
A + B agent |
30 kg/group |
color
Hazel (A agent: transparent/B agent: brown)
Technical information
The best life
Since the production date is 12 months
Storage conditions
Original packaging intact without damage, deposited in the temperature + 5 ° to 30 ° C + C dry environment, avoid direct contact with sunlight.
The density of
After the agent A and B mixed: about 1.06 kg/liter
viscosity
300-600 mPa, s |
(CNS 10142). |
The compression strength
> 500 KGF/cm2(3 days) |
(ASTM D695) |
The bending tensile strength
> 100 kg/cm2(3 days) |
(ASTM D638) |
applied
Mix proportion
Agent A: B agent = 2:1 weight ratio
Operating time
> 30 minutes (in + 23 ° C)
Amount can be coated
Volume: the theoretical value of 28.3 liters / 30 kg a group
Element to organize
Surface must be clean, solid must be dry or slightly damp, but there is no water.
hybrid
Agent A and B should stir in advance, the agent A and B in proportion to combine (A: B = 2:1) clean bucket, again with low speed mixer (400-600 r/min) for 3 minutes until the material evenly.Amount of mixing materials can be used in time after use.