Sikacrete ® Floor Level
Sikacrete ® Floor Level is a one-component polymer modification, can pump the high-performance cement-based self-leveling cushion, used in construction the final Floor surface (such as tile, carpet, parquet Floor/wood, vinyl, etc.) before the indoor Floor flat and smooth.
- New product mix of liquidity and cohesion is very good, so the construction speed is fast
- Excellent adhesion and high mechanical strength
- Very good surface appearance and hardness
- Able to leveling the surface of the thickness of 3-20 mm (after adding aggregate maximum 20 mm, maximum 20%)
Using range
Sikacrete ® Floor Level used in high-rise building, exhibition hall, auditorium, shopping malls, residential and other new Floor or decorate the surface of the Floor is flat and Level.For indoor use only.Feature/advantages
- New product mix of liquidity and cohesion is very good, so the construction speed is fast
- Excellent adhesion and high mechanical strength
- Very good surface appearance and hardness
- Able to leveling the surface of the thickness of 3-20 mm (after adding aggregate maximum 20 mm, maximum 20%)
packaging
25 kg packing
color
Light gray powder
Technical information
The best life
Since the production within 12 months
Storage conditions
The original store in dry environment, avoid direct sunlight.
The density of
dry |
About 1.46 kg/L |
| wet | About 2.17 kg/L |
The compression strength
28, |
About 35 N/mm2 |
The bending tensile strength
28, |
About 6 N/mm2 |
Glued to the tensile strength
28 = 1.5 N/mm2(the concrete destroy.
applied
Mix proportion
Water: Sikacrete ® Floor Level = 3.5 to 4.5 L: 25 kg packing
Interlayer thickness
The minimum |
3 mm |
The highest |
20 mm (including adding aggregate, up to 20%) |
Environmental atmospheric temperature
+ 5 ° C to + 35 ° C
Element to temperature
+ 5 ° C to + 35 ° C
The dosage
About 1.9 kg/m2Each mm thickness
hybrid
Artificial 25 kg dry powder mixing wrapped into clean water container.
Thorough stirring at least 3 minutes until smooth.Using electric mixer speed below 500 RPM.
applied
pumping
Using the traditional floor stratified two-stage blenders and pumping, and control of water consumption in order to achieve the required flow.Construction, after the primer on the surface with a trowel or acupuncture floor rake construction to the required thickness.Use needle roller vertical roll flat carefully, to remove trapped air.
artificial
Pour mixture material to the surface of primer has construction, with a trowel or acupuncture floor rake construction to the required thickness.Use needle roller vertical roll flat carefully, to remove trapped air.
Tools to clean
Immediately after construction with clear water clean all tools and equipment.Hardening of the curing material can only be removed in mechanical way.